A booster/overdrive based on the infamous overdriver circuit of English fame. Redesigned and condensed into a smaller more pedalboard friendly enclosure. The BC109 has your typical overdriver controls, drive, treble and bass. It also has an added volume control that the vintage units never had which was one of the reasons they were very hard to get along with. Another added feature of the BC109 is the added cut knob. If you have any experience with the vintage overdrivers you know that when you used the drive control it was either all or nothing, hence the name booster/overdrive. The cut knob allows you to tame the overdrive down and set it to your liking instead of having to fiddle around with you volume knob on your guitar. Utilizing period correct BC109 transistors this overdrive circuit is sure to please the most particular ears. I'm proud to say that this is also one of Josh Klinghoffer's top pedals as well. Enough talking about it, scroll down and check out the demo videos of this unit in action! All of our pedals are built with a true bypass circuit therefore not sucking the life out of your signal when in bypass mode. The BC109 operates on an industry standard 2.1mm center negative power supply. All pedals are covered by a one year warranty on parts and labor and is hand built right here in the U.S. If you should happen to have any other questions about the BC109 please feel free to contact us via the contact form on the Home page of the site.